F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

240
c. Enter vpdnuser as the user name, select PPP as the service type, enter Hello as the password,
and enter Hello to confirm the password, as shown in
844HFigure 163.
d. Click Apply.
Figure 163 Adding a local user
4. Enable L2TP:
a. Select VPN > L2TP > L2TP Config from the navigation tree.
b. Select the Enable L2TP box, as shown in 845HFigure 164.
c. Click Apply.
Figure 164 Enable L2TP
5. Add an L2TP group:
a. Click Add on the page in 846HFigure 164.
b. Enter the L2TP group name test, the peer tunnel name vpdnuser, and the local tunnel name LNS,
and select Disable for Tunnel Authentication, CHAP as the PPP authentication method, and ISP
domain system (the default ISP domain).
c. Click the Modify button for the ISP domain, and select Local as the server type for the primary
authentication method, as shown in
847HFigure 165.
d. Click Apply to complete the ISP domain configuration and return to the L2TP group
configuration page.