F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

332
Item Descri
p
tion
Website Matching Pattern
Specify website matching patterns to determine which webpages a user can
access through the website specified in the Website Address field.
Website matching supports fuzzy match based on wildcard *. Use vertical bars
(|) to separate multiple matching patterns.
Assume that you have specified a website address in the Website Address field.
To allow access to specific webpages provided at the website, for example, the
webpages www.domain1.com, www.domain2.com, www.domain2.org, and
www.domain2.edu, you can specify www.domain1.com|www.domain2.* as
the matching patterns.
Enable page protection
Select this box to enable page protection.
With page protection enabled, a login user cannot capture screen shots, save
pages, or printing pages.
4. Set whether to enable single login:
To enable single login, select the box before the Single login field to expand the configuration area
(as shown in
944HFigure 222), and then configure the single login parameters as described in 945HTable
33.
After you enable single login and configure single login parameters, when a user accesses the
resource through the SSL VPN service interface, the user is redirected to the specified website if the
user's username and password for accessing the website are the same as those for logging in to
the SSL VPN service interface.
5. Click Apply.
Figure 222 Configuring single login
Table 33 Configuration items
Item Descri
p
tion
Use IP network
Select this box to allow IP access to the resource.
If you select this item, you must configure an IP network resource for a website
and associate the IP network resource with the relevant users. When such a user
accesses the website from the SSL VPN Web interface, the system automatically
logs the user in to the website through the IP network resource.
If you do not select this item, users access the resource through the Web proxy
server.