F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

333
Item Descri
p
tion
Login Request Path
• When you select the IP network mode, this item specifies the path that the
system submits during single login. If you leave this field blank, the system uses
the address that is specified in the Website Address field.
• When the IP network mode is not selected, this item specifies the relative path
of the Web proxy website. If you leave this field blank, the SSL VPN system
uses the default page specified in the Default Page field.
Username Parameter
Name
Specify the username parameter name that the system submits during automatic
login.
Password Parameter Name
Specify the password parameter name that the system submits during automatic
login.
Other parameters
Specify the other parameters for the system to submit during automatic login.
To add a parameter other than the username and password, click Add, enter the
parameter name and parameter value on the popup page and click Apply.
Another way to configure the single login function is as follows:
6. Click the icon of a resource on the Web proxy server resource list, as shown in 946HFigure 220.
7. Enter a username and a password (the password must be different from the username) on the
popup page, and click Apply.
The login page for the website in the resource pops up.
8. Enter the username and password again and log in.
A message will tell you that the single login function is configured successfully.
During this process, the system automatically gets the username parameter name and the password
parameter name. When the website login page requires parameters other than the username and
password, you cannot configure single login in this method.
563BConfiguring TCP application resources
You can configure the following types of TCP application resources:
• Remote access service resources
• Desktop sharing service resources
• Email service resources
• Notes mail service resources
• Common TCP service resources
1. Configure a remote access service resource:
The remote access service includes remote character terminal services (such as Telnet and SSH)
and traditional terminal services (such as IBM3270). These services each simulate a server's
terminal window on a local host through which you can control a remote host as if you were sitting
before it. Between the local and remote hosts, data is transmitted in plain text over the Internet. To
ensure the security of data transmission, SSL VPN uses the SSL encryption technology to encrypt
service data.
a. Select VPN > SSL VPN > Resource Management > TCP Application from the navigation tree.
The Remote Access Service page appears, as shown in
947HFigure 223.