F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

341
Task Remarks
960H
Configure a predefined
domain name
Optional.
With a predefined domain name configured, the gateway sends the mapping
between the predefined domain name and the IP address to clients. When
accessing this domain, a client directly uses the corresponding IP address,
eliminating the requirement for DNS resolution.
1. Configure global parameters:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
The Global Configuration tab appears, as shown in
961HFigure 233.
Figure 233 Global configuration page
b. Configure the global parameters for IP network resources, as described in 962HTable 39.
c. Click Apply.
Table 39 Configuration items
Item Descri
p
tion
Start IP
Specify the IP address pool from which the gateway assigns IP addresses for clients'
virtual network adapters.
End IP
Subnet Mask Enter the subnet mask to be assigned to a client's virtual network adapter.
Gateway IP
Enter the default gateway IP address to be assigned to a client's virtual network
adapter.
Timeout
Set an idle timeout for client connections. If the gateway does not receive any packet
from a client during this period, the gateway disconnects the client.
WINS Server IP Enter the WINS server IP addresses to be assigned to a client's virtual network adapter.
DNS Server IP Enter the DNS server IP addresses to be assigned to a client's virtual network adapter.
Allow clients to
intercommunicate
Select this item to allow IP access between online users.
Permit only access to
VPN
Select this item to allow online users to access only the VPN.
If you do not select this item, online users can access both the VPN and the Internet.