F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

343
e. Click Add under the Network Services list.
The following dialog box appears:
Figure 236 Adding an available network service
f. Configure the network service as described in 964HTable 40.
Table 40 Configuration items
Item Descri
p
tion
Destination IP Enter the destination address of the network service.
Subnet Mask Enter the subnet mask of the network service.
Protocol Specify the protocol type of the network service, IP, TCP, or UDP.
Description
Enter a description for the network service.
If you have configured the system to show network services by description, HP
recommends that you include the network services' network information (subnet
IP/mask) in the description so that users can view desired information after they log in
to the SSL VPN system.
g. Click Apply to add the network service to the network service list.
h. Repeat steps 5 to 7 to add multiple network services.
i. Click the Add button under the shortcuts list to enter the page for adding a network service
shortcut.
Figure 237 Adding a network service shortcut
j. Enter a name for the shortcut and specify the Windows command of the shortcut.
k. Click Apply to add the shortcut to the shortcut list.
l. Repeat steps 9 to 11 to add multiple shortcuts.
m. Click Apply at the bottom of the Add Host Resource page.