F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

344
3. Configure a user-IP binding:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
b. Click the User-IP Binding tab to view existing user-IP bindings, as shown in 965HFigure 238.
Figure 238 User-IP bindings
c. Click Add to enter the page for adding a user-IP binding.
Figure 239 Adding a user-IP binding
d. Configure the user-IP binding as described in 966HTable 41.
e. Click Apply.
Table 41 Configuration items
Item Descri
p
tion
Username
Specify the username to be bound with an IP address. The username must contain the
domain name. For example, aaa@local.
IP Address
Specify the IP address to be bound with the username.
The specified IP address must be in the same network segment as the global IP address
pool and must not be the gateway address or any address in the global IP pool.
4. Configure a predefined domain name:
a. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
b. Click the Predefined Domain Name tab to view existing predefined domain names, as shown
in
967HFigure 240.