F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

345
Figure 240 Predefined domain names
c. Click Add to enter the page for adding a predefined domain name.
Figure 241 Adding a predefined domain name
d. Configure the predefined domain name as described in 968HTable 42.
e. Click Apply.
Table 42 Configuration items
Item Descri
p
tion
Domain Name Enter a domain name to be issued to clients.
IP Setting Method
Select the IP setting method, including Dynamic and Static.
• Dynamic—To use this method, you also need to navigate to page Network
Management > DNS to configure domain name resolution. The gateway will first
resolve the domain name to get an IP address and then issue the IP address to
clients.
• Static—To use this method, you must specify an IP address in the next field. The
gateway will issue the domain name-IP address mapping to clients.
IP
Specify an IP address for the domain name when the IP setting method is Static.
When the IP setting method is Dynamic, this IP setting does not take effect.
565BConfiguring a resource group
1. Select VPN > SSL VPN > Resource Management > Resource Group from the navigation tree.
The Resource Group page appears, listing all existing resource groups, as shown in
969HFigure 242.