F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

349
Item Descri
p
tion
Enable public
account
Select this item to set the local user account as a public account. A public account can be
concurrently used by multiple users to log in to the SSL VPN system.
If you do not select this item, only one user can use the local user account to log in to the SSL
VPN system at a time.
Max Number of
Users
Set the maximum number of concurrent users that can log in to the SSL VPN system by using
the public account.
The value range depends on the device model. For more information, see
973H
Table 45.
User Status Select a user status, Permitted, Permitted When Valid, or Denied.
Expiry Date Set the expiration date for the user when the user status is set to Permitted When Valid.
MAC Address
Specify the MAC addresses to be bound with the
username. The MAC addresses are used for user
identity authentication.
IMPORTANT:
To implement the two functions,
you must also enable the MAC
address binding function in the
domain policy. See "
974HConfigure the
domain policy."
Enable MAC
address
learning
Select this item to enable MAC address learning.
With this function enabled, when a user uses this user
account to log in, the SSL VPN system automatically
learns the MAC address of the user host and records
the MAC address for the account. The SSL VPN can
record up to three MAC addresses for an account. The
recorded MAC addresses are still effective after you
disable the MAC address learning function.
Selected User
Groups
Specify the user groups to which the local user belongs.
Available User
Groups
Table 45 Value range for the Max Number of Users field
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 1 to 100
F1000-E 1 to 200
F5000 SSL VPN not supported
Firewall module SSL VPN not supported
U200-A 1 to 100
U200-S 1 to 100
2. Import local users in bulk:
a. Select VPN > SSL VPN > User Management > Batch Import from the navigation tree.
The batch import page appears, as shown in
975HFigure 246.
b. Click Browse to locate the local file that saves the user information.
c. Set whether to directly overwrite the file with the same name on the device.
d. Click Apply to import local users into the SSL VPN.