F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

353
• Domain policy—Defines the common parameters and functions for the SSL VPN domain.
• Caching policy—Specifies which cached contents to clear from user hosts when users log out from
the SSL VPN system.
• Bulletin management—Allows you to provide different information to different users.
1. Configure the domain policy:
a. Select VPN > SSL VPN > Domain Management > Basic Configuration from the navigation tree.
The Domain Policy tab appears, as shown in
979HFigure 251.
Figure 251 Domain policy
b. Configure the domain policy as described in 980HTable 48.
c. Click Apply.
Table 48 Configuration items
Item Descri
p
tion
Enable security check
Select this item to enable security check.
With security check enabled, the SSL VPN system checks a user host based on the
security policy and determines whether to allow the user to access resources according
to the check result.
IMPORTANT:
To implement user host security check, you must also configure the security policy. See
"
981HConfiguring a security policy."
Use verification code
Select this item to use verification codes.
After you select this item, users must enter the correct verification codes to log in to the
SSL VPN system.
Enable separate
client
Select this item to enable the separate client function.
After a user logs in to SSL VPN, the SSL VPN client automatically runs. With separate
client enabled, the system automatically closes the SSL VPN Web interface, leaving the
client software running alone.