F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

367
The picture is uploaded to the SSL VPN system and is used as the logo picture on the service
page.
Figure 264 Specifying a service page logo picture
# Configure the service page background:
a. Select VPN > SSL VPN > Page Customization > Partial Customization from the navigation tree.
b. Click the Service Page Background tab to enter the page shown in 1000HFigure 265.
c. Click Browse to select a local picture file.
d. Set whether to directly overwrite the file with the same name on the device.
e. Click Apply.
The picture is uploaded to the SSL VPN system and is used as the service page background
picture.
Figure 265 Specifying a service page background picture
2. Fully customize the SSL VPN interface:
Before full customization of the SSL VPN interface, upload the customized page file to the SSL VPN
gateway through FTP or TFTP.
a. Select VPN > SSL VPN > Page Customization > Full Customization from the navigation tree.
The full customization page appears, as shown in
1001HFigure 266.