F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

368
Figure 266 Full customization
b. Configure the customization information as described in 1002HTable 56.
c. Click Apply.
Table 56 Configuration items
Item Descri
p
tion
Enable full customization Select this item to enable the full customization function.
Directory
Enter the directory where the customized page files are saved on the SSL
VPN gateway.
Page File Enter the name of the customized login page file.
279BConfiguring user access to SSL VPN
The following matrix shows the feature and hardware compatibility:
Hardware Feature com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 No
Firewall module No
U200-A Yes
U200-S Yes
This section introduces user access to the SSL VPN service interface provided by the system. It is not
suitable for user access to a fully customized SSL VPN service interface.
After you finish configurations on the SSL VPN gateway, remote users can establish HTTPS connections
to the SSL VPN gateway, and access resources through the user service interface provided by the SSL
VPN gateway.
573BLogging in to the SSL VPN service interface
To log in to the SSL VPN service interface, a user needs to complete the following steps:
1. Launch a browser.
2. Enter https://host:port/svpn/ in the address bar to enter the SSL VPN login page. host and port
are the SSL VPN gateway's host address and service port number, and port can be omitted when
the SSL VPN service port number is 443, the default value.