F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

32
Figure 27 Adding a GRE over IPv4 tunnel interface
3. Configure a static route from Firewall B through interface Tunnel0 to the headquarters node:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add.
c. Enter 192.168.11.0 as the destination IP address.
d. Select mask 255.255.255.0.
e. Select Tunnel0 as the outbound interface.
f. Click Apply.
Figure 28 Adding a static route from Firewall B through interface Tunnel0 to the headquarters node
347BVerifying the configuration
1. On Firewall A, select VPN > GRE > P2MP from the navigation tree, and then click the Tunnel List
tab to view the tunnel entries. There should be no tunnel entry.