F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

36
Figure 32 Adding a P2MP GRE tunnel interface (Tunnel0)
4. Configure a static route from Firewall A through interface Tunnel0 to the branch network:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add.
c. Enter 192.168.12.0 as the destination IP address.
d. Select mask 255.255.255.0.
e. Select Tunnel0 as the outbound interface.
f. Click Apply.
Figure 33 Adding a static route from Firewall A through interface Tunnel0 to the branch network
350BConfiguring Firewall B
1. Configure an IPv4 address for each interface and assign the interfaces to security zones. (Details
not shown.)
2. Create a P2MP GRE tunnel interface, with the tunnel interface number being 0:
a. Select VPN > GRE > P2MP from the navigation tree.
b. Click Add.