F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

46
Figure 47 Adding a static route from Firewall B through interface Tunnel0 to the headquarters node
356BConfiguring Firewall C
1. Configure an IPv4 address for each interface and assign the interfaces to security zones. (Details
not shown)
2. Create a GRE over IPv4 tunnel interface:
a. Select VPN > GRE > GRE from the navigation tree.
b. Click Add.
c. Enter 0 in the Tunnel Interface field.
d. Enter IP address/mask 192.168.22.3/24.
e. Select Management from the Zone list. (Select a security zone according to your network
configuration.)
f. Enter the tunnel source IP address 11.1.1.3, the tunnel destination IP address 11.1.1.1, and the
GRE key 2.
g. Click Apply.