F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

74
...
# Ping the IPv6 address of GigabitEthernet 0/1 at the peer end from Firewall A.
[FirewallA] ping ipv6 3003::1
PING 3003::1 : 56 data bytes, press CTRL_C to break
Reply from 3003::1
bytes=56 Sequence=1 hop limit=64 time = 1 ms
Reply from 3003::1
bytes=56 Sequence=2 hop limit=64 time = 1 ms
Reply from 3003::1
bytes=56 Sequence=3 hop limit=64 time = 1 ms
Reply from 3003::1
bytes=56 Sequence=4 hop limit=64 time = 1 ms
Reply from 3003::1
bytes=56 Sequence=5 hop limit=64 time = 1 ms
--- 3003::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms
26B
Configuring an automatic IPv4-compatible IPv6
tunnel
The following matrix shows the feature and hardware compatibility:
Hardware Automatic IPv4-com
p
atible IPv6 tunnel com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
134BConfiguration prerequisites
Configure an IP addresses for the interface (such as a VLAN interface, Ethernet interface, or a loopback
interface) to be used as the source interface of the tunnel interface.
135BConfiguration guidelines
Follow these guidelines when you configure an automatic IPv4-compatible IPv6 tunnel: