HP A6600 VPN Firewall Card Manual-6P102

Manual Version: 6P102-20111130 BOM: 3123A0F7 Part number: 5998-2241
iii
Item S
p
ecification
Connector RJ-45 (for electrical interface) or SFP/LC (for optical interface)
Cable and maximum
transmission distance
• Console port—Asynchronous serial cable with maximum transmission
distance of 15 m (49.21 ft)
• 10/100/1000BASE-T electrical interface—Category 5 or above UTP
with maximum transmission distance of 100 m (328.08 ft)
• 1000BASE-X SFP optical interface—For more information, see Table 3
CF card and slot
One CF card slot, 256 MB by default for the external CF card
256 MB, 512 MB, or 1 GB for an optional external CF card
Applied to HP A6604, A6608, and A6616
Table 3 1000BASE-X SFP interface specifications
Item S
p
ecification
Connector SFP/LC
Interface standards 802.3, 802.3u, and 802.3ab
Optical
transmit
power
Type
Short-haul
multi-mode
(850 nm)
Optical
interface
module
Mid-haul
single-mode
(1310 nm)
Optical
interface
module
Long-haul
(1310 nm)
Optical
interface
module
Long-haul
(1550 nm)
Optical
interface
module
Extra-long-ha
ul (1550 nm)
Optical
interface
module
Min –9.5dBm –9dBm –2dBm –4dBm –4dBm
Max 0dBm –3dBm 5dBm 1dBm 2dBm
Reception sensitivity –17dBm –20dBm –23dBm –21dBm –22dBm
Central wavelength 850nm 1310nm 1310nm 1550nm 1550nm
Fiber type
62.5/125μm
MM fiber
9/125μm SM
fiber
9/125μm SM
fiber
9/125μm SM
fiber
9/125μm
SM fiber
Max transmission
distance
0.55 km (0.34
miles)
10 km (6.21
miles)
40 km (24.86
miles)
40 km (24.86
miles)
70 km
(43.50
miles)
3 Installing and removing the SPE-FWM-200
W
ARNING!
• Wear an ESD-preventive wrist strap and ESD-preventive gloves before installing or removing the
module, and make sure that the ESD-preventive wrist strap is properly grounded..
• Avoid touching any components on the PCB and hold the PCB by its edge when installing and removin
g
the module.
NOTE:
The SPE-FWM-200 is hot swappable. That is, you can remove the module from a router when the router
is powered on.