HP A8800 SSL VPN Card Manual-6P102

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

Manual Version: 6P102-20111130 BOM:

3123A0FD

Part number: 5998-2247

HP A8800 SSL VPN Module

1 Appearance

The silkscreen IM-SSL is printed at the upper right corner of the front panel, and it identifies the module.

Figure 1 Appearance of the IM-SSL

2 Specifications

The IM-SSL module provides one console port, one CF card slot, and two USB interfaces.

Figure 2 Front panel of the IM-SSL

(1) CF card eject button (2) CF card slot (CF CARD) (3) CF LED (CFS)

(4) Console port (CONSOLE) (5)

USB interface

(reserved)

(6) USB interface 2 (reserved)

(7) USB interface 2 LED (USB) (8) Ejector lever

(9) Captive screw

Table 1 Description of the LEDs on the IM-SSL

Silkscreen Color Status Descri

tion

CFS Green

Off No CF card is present or the CF card is not recognizable.

On A CF card is in position and has passed the power-on self test.

Blinking

The system is accessing the CF card. In this state, do not remove

the CF card.

Summary of content (6 pages)

PAGE 1
Manual Version: 6P102-20111130 BOM: 3123A0FD Part number: 5998-2247 HP A8800 SSL VPN Module 1 Appearance The silkscreen IM-SSL is printed at the upper right corner of the front panel, and it identifies the module. Figure 1 Appearance of the IM-SSL 2 Specifications The IM-SSL module provides one console port, one CF card slot, and two USB interfaces.
PAGE 2
Manual Version: 6P102-20111130 BOM: 3123A0FD Part number: 5998-2247 Table 2 IM-SSL specifications Item Interface Specification One console port Two USB interfaces (reserved) Interface transmission speed Console port: 9600 bps to 115200 bps (default: 9600 bps) Cable and maximum transmission distance Console port: Asynchronous serial cable with maximum transmission distance of 15 meters (49.
PAGE 3
Manual Version: 6P102-20111130 BOM: 3123A0FD Part number: 5998-2247 Figure 3 Insert the IM-SSL (1) Push the IM-SSL into the slot along the guide rails until the positioning hole of the module is seated onto the positioning pin on the backplane. (2) Push the ejector levers inward to lock the IM-SSL in place. 3.2 Removing the IM-SSL 1. Loosen the captive screws on the IM-SSL with a Philips screwdriver until all spring pressure is released. 2.
PAGE 4
Manual Version: 6P102-20111130 BOM: 3123A0FD Part number: 5998-2247 Figure 4 Access the module by the console port 2. Configure the terminal emulation program on your PC On your PC, run a terminal emulation program, such as Terminal of Windows 3.X and HyperTerminal of Windows 9X and Windows XP.
PAGE 5
Manual Version: 6P102-20111130 BOM: 3123A0FD Part number: 5998-2247 NOTE: • By default, the port number for super administrators and administrators is 444, and that for normal users is 443. These two port numbers are configurable. If you do not specify the management port when inputting the address of the SSL VPN management page in the address bar of the IE browser, you access the normal user interface. • The initial username and password of a super administrator are both administrator.
PAGE 6
Manual Version: 6P102-20111130 BOM: 3123A0FD Part number: 5998-2247 NOTE: • The IM-SSL does not support software upgrade through a main processing unit (MPU) of the router. • The IM-SSL does not provide management interface on its panel, you need to use a crossover ethernet cable to connect the service port (for example, GigabitEthernet3/0/1) of the router to the PC (FTP or TFTP server), and ensure that the module can communicate with the PC at Layer 3.