HP Security Modules Software Upgrade Guide-6PW103

14
Introduction to the BootWare Menu
Main Menu
After the above configurations are completed and the Security module is powered on, the module first
performs system initialization. After system initialization, the following information is displayed on the
configuration terminal:
NOTE:
For different Security modules or different versions of BootWare pro
g
rams, the information displayed on
the configuration terminal may slightly differ.
System start booting...
Booting Normal Extend BootWare....
****************************************************************************
* *
* HP SecBlade FW BootWare, Version 1.35 *
* *
****************************************************************************
Copyright (c) 2004-2010 Hewlett-Packard Development Company, L.P.
Compiled Date : Sep 17 2010
CPU Type : XLR732
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 2048MB
Memory Speed : 533MHz
BootWare Size : 1536KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 3.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl+B to enter the extended boot menu. Otherwise, the Security module will enter the application
file decompression process.
NOTE:
• You must press Ctrl+B in four seconds after “Press Ctrl+B to enter extended boot menu” appears.
Otherwise, the Security module will enter the application file decompression process.
• After the Security module enters the application decompression process, if you want to enter the
extended boot menu, you need to reboot the Security module.
• The extended boot menu is referred to as the main menu unless otherwise specified.