HP Security Modules Software Upgrade Guide-6PW103

16
Menu item Descri
p
tion
<8> Clear Super Password
Clear the super user password.
The super user password is required in user level switching.
By default, no super user password is set.
The setting is valid only for the first reboot of the Security module and
the super user password will be restored next time the Security
module reboots.
<9> Storage Device Operation
Enter the storage device operation submenu to select applications
from a storage device to boot the Security module.
<0> Reboot Reboot the Security module.
Serial Submenu
Select 2 on the main menu to enter the serial submenu, where you can upgrade applications using
Xmodem. The serial submenu is as follows:
======================<SERIAL SUB-MENU>======================
|Note:the operating device is cfa0 |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Update Backup Application File |
| <4> Update Secure Application File |
| <5> Modify Serial Interface Parameter |
| <0> Exit To Main Menu |
=============================================================
Enter your choice(0-5):
Table 7 describes the serial submenu items.
Table 7 Serial submenu
Submenu item Descri
p
tion
<1> Download Application Program To
SDRAM And Run
Download an application to the SDRAM through the serial
interface and run the application.
<2> Update Main Application File Upgrade the main application file.
<3> Update Backup Application File Upgrade the backup application file.
<4> Update Secure Application File Upgrade the secure application file.
<5> Modify Serial Interface Parameter Modify the serial interface parameters.
<0> Exit To Main Menu Return to the main menu.
Ethernet Submenu
Select 3 on the main menu to enter the Ethernet submenu, where you can upgrade applications using
FTP/TFTP. The Ethernet submenu is as follows:
====================<ETHERNET SUB-MENU>======================
|Note:the operating device is cfa0 |
| <1> Download Application Program To SDRAM And Run |