HP Security Modules Software Upgrade Guide-6PW103
34
Displaying all files
Select 1 on the file control submenu. The following information is displayed:
Display all file(s) in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
=============================================================
NO. Size(B) Time Type Name
1 10129712 Apr/11/2007 05:39:50 B cfa0:/main.bin
2 1227 May/11/2007 16:25:52 N/A cfa0:/startup.cfg
3 2294 May/11/2007 14:47:32 N/A cfa0:/~/startup.cfg
4 2094 May/11/2007 13:47:34 N/A cfa0:/~/startup_bac.cfg
Modifying a file type
You can modify the type of application files of type M, B or N/A except type S on the file control
submenu, or at the CLI after the Security module boots.
Step1 Select 2 on the file control submenu. The following information is displayed:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
=============================================================
NO. Size(B) Time Type Name
1 10129712 Jun/11/2007 05:39:50 B cfa0:/main.bin
0 Exit
=============================================================
Enter file no:
Step2 Enter a file number (for example, 1) and press Enter. The following information is displayed.
Modify the file attribute:
| <1> +Main |
| <2> -Main |
| <3> +Backup |
| <4> -Backup |
| <0> Exit |
Enter your choice(0-4):
You can add/remove a type attribute, M (main) or B (backup), to/from a file by selecting a choice 1 to
4. For more information of each type of files, see “Files”.
Deleting a file
Step1 Select 3 on the file control submenu. The following information is displayed:
Deleting the file in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
=============================================================
NO. Size(B) Time Type Name
1 10129712 Apr/11/2007 05:39:50 B cfa0:/main.bin
2 1227 May/11/2007 16:25:52 N/A cfa0:/startup.cfg
3 2294 May/11/2007 14:47:32 N/A cfa0:/~/startup.cfg
4 2094 May/11/2007 13:47:34 N/A cfa0:/~/startup_bac.cfg
0 Exit
=============================================================
Enter file no:
Step2 Enter a file number (for example, 4) and press Enter. The following information is displayed.