ProCurve VPN Client and ProCurve Secure Router 7000dl Series - Application Note

Configuring the ProCurve VPN Client Software
1. Configure new connection
a) Start the Security Policy Editor by double-clicking on the ProCurve VPN Client icon in
the Taskbar. Then select Edit > Add > Connection to create a New Connection.
b) Select Secure from the Connection Security list.
c) For ID Type choose IP Subnet. Then enter 10.24.25.0 and 255.255.255.0 for the
Subnet and Mask (ProCurve 7000dl router’s Private LAN network).
d) Check Connect using and Select Secure Gateway Tunnel.
e) Under ID type select Any and Gateway IP Address and below enter the WAN IP
address of the ProCurve 7000dl series router.
Figure 1