ProCurve VPN Client and ProCurve Secure Router 7000dl Series - Application Note

5. Configure IPSec Parameters
Click on the plus (+) sign by Key Exchange (Phase 2). Then click on Proposal 1. Under
IPSec Protocols, select Seconds for SA life. For Seconds enter 600 (The IPSec
Lifetime Secs of the ProCurve 7000dl router). Check Encapsulation Protocol (ESP).
Select Triple DES for the Encrypt Alg, SHA1 for the Hash Alg and Tunnel for the
Encapsulation. See Figure 5.
Figure 5
6. Save and Reload new Policy
Finally, click on File and then Save. Right-click on the ProCurve VPN Client icon and
select Reload Security Policy. On the PC, open up a DOS prompt and type ping
10.24.25.1. This should activate the tunnel and you should get replies from 10.24.25.1