Quick Start Guide ProCurve Secure Router 7100/7200 IPSec Module J8471A

Quick Start Guide 5991-2110

ProCurve Secure Router 7100/7200 IPSec Module

J8471A

EATURES

The ProCurve Secure Router 7100/7200 IPSec Module is

designed to be used in the ProCurve Secure Router to

provide encryption/decryption and security acceleration

services. The card provides the following security services

to the host processor: DES, triple-DES (3DES), AES,

SHA-1, MD5, and random number generation. performance

metrics include 528 Mbps (DES), 176 Mbps (3DES), and

422 Mbps (AES). The power consumption of the card does

not exceed 2 watts.

Inserting the optional ProCurve Secure Router 7100/7200

IPSec Module enables additional, security-related software

features on the router. With this module installed, you can

create VPN site-to-site connections between routers. If VPN

client connectivity is required, users must purchase the

ProCurve VPN Client to connect to the router. For more

information on the ProCurve VPN Client software, go to

www.procurve.com.

INSTALLATION INSTRUCTIONS

1. Remove the power from the unit.

2. Slide the ProCurve Secure Router 7100/7200 IPSec

Module into the Encryption Module slot (located on the

back of the chassis) until the module is firmly seated

against the chassis.

3. Secure the screws at both edges of the module.

4. Restore power to the unit.

5. The configuration options for encryption will now be

available in the graphical user interface and the Secure

Router Operating System command line interface.

Note

For safety information for the routers and all

modules, please refer to the safety and ESD

precautions in the ProCurve Secure Router

Installation Guide included in your router shipment.