R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

99
Field Descri
p
tion
Discarded No-response-acct-stop
packet for buffer overflow
Number of stop-accounting packets that were buffered but then
discarded due to full memory
display stop-accounting-buffer (for RADIUS)
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name }
View
Any view
Default level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies buffered stop-accounting requests that are destined for
the accounting server defined in a RADIUS scheme. The RADIUS scheme name is a case-insensitive
string of 1 to 32 characters.
session-id session-id: Specifies the stop-accounting requests buffered for a session. The session ID is a
string of 1 to 50 characters.
time-range start-time stop-time: Specifies the stop-accounting requests buffered in a time range. The start
time and end time must be in the format HH:MM:SS-MM/DD/YYYY or HH:MM:SS-YYYY/MM/DD.
user-name user-name: Specifies the stop-accounting requests buffered for a user. The username is a
case-sensitive string of 1 to 80 characters. Whether the user-name argument should include the domain
name depends on the setting configured by the user-name-format command for the RADIUS scheme.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device.
NOTE:
If the device sends a stop-accounting request to a RADIUS server but receives no response, it retransmits
it up to a certain number of times (defined by the retry command). If the device still receives no response,
it considers the stop-accounting attempt a failure, buffers the request, and makes another stop-accountin
g
attempt. The maximum number of the stop-accounting attempts is defined by the retry stop-accounting
command. If all attempts fail, the device discards the request.
Related commands: reset stop-accounting-buffer, stop-accounting-buffer enable, user-name-format,
retry, and retry stop-accounting.
Examples
# Display information about the stop-accounting requests buffered for user abc.
<Sysname> display stop-accounting-buffer user-name abc
RDIdx Session-ID user name Happened time
1 1000326232325010 abc 23:27:16-08/31/2006
1 1000326232326010 abc 23:33:01-08/31/2006