R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

Field Descri

tion

rule 0 permit Content of rule 0

5 times matched

There have been five matches for the rule. The statistic counts

only ACL matches performed in software.

This field is not displayed when no packets have matched the

rule.

rule 10 comment This rule is used in VPN rd.

The description of ACL rule 10 is "This rule is used in VPN rd."

display acl accelerate

Syntax

display acl accelerate { acl-number | all }

View

Any view

Default level

1: Monitor level

Parameters

acl-number: Specifies an IPv4 ACL number:

• 2000 to 2999 for IPv4 basic ACL

• 3000 to 3999 for IPv4 advanced ACL

all: Displays ACL acceleration status information for all IPv4 ACLs.

Description

Use the display acl accelerate command to display ACL acceleration status for one or all IPv4 ACLs.

Examples

# Display ACL acceleration status for all IPv4 ACLs.

<Sysname> display acl accelerate all

Status: UTD -- up to date, OOD -- out of date

Accelerate: ACC -- accelerated, UNACC -- unaccelerated

Group Accelerate Status

--------------------------------------------------

2000 ACC UTD

3000 ACC OOD

3001 ACC UTD

3002 UNACC UTD

Table 2 Output description

Field Descri

tion

Group IPv4 ACL number