R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

7
Field Descri
p
tion
Accelerate
Whether ACL acceleration is enabled:
• ACC—Enabled
• UNACC—Disabled
Status
Whether ACL acceleration is using up to date criteria for rule
matching:
• UTD—The ACL criteria are up to date and have not changed
since ACL acceleration was enabled.
• OOD—The ACL criteria are out of date. This state is
displayed, if you have modified the ACL after ACL
acceleration was enabled. ACL acceleration matches packets
still against the old criteria. To ensure correct packet
matching, disable and re-enable ACL acceleration.
reset acl counter
Syntax
reset acl counter { acl-number | all | name acl-name }
View
User view
Default level
2: System level
Parameters
acl-number: Specifies an IPv4 ACL by its number:
• 2000 to 2999 for IPv4 basic ACLs
• 3000 to 3999 for IPv4 advanced ACLs
• 4000 to 4999 for Ethernet frame header ACLs
all: Clears statistics for all IPv4 ACLs.
name acl-name: Specifies an IPv4 ACL by its name. The acl-name argument takes a case insensitive
string of 1 to 32 characters. It must start with an English letter.
Description
Use the reset acl counter command to clear statistics for the specified IPv4 ACL or all IPv4 ACLs.
Related commands: display acl.
Examples
# Clear statistics for IPv4 basic ACL 2001.
<Sysname> reset acl counter 2001
# Clear statistics for IPv4 ACL flow.
<Sysname> reset acl counter name flow