R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

129
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an authorization server only when it is not used by any active TCP connection to send
authorization packets. Removing an authorization server affects only authorization processes that occur
after the remove operation.
Related commands: display hwtacacs.
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS scheme
hwt1 a s 10 .16 3 .15 5 .13 a n d 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
reset hwtacacs statistics
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
View
User view
Default level
1: Monitor level
Parameters
accounting: Clears HWTACACS accounting statistics.
all: Clears all HWTACACS statistics.
authentication: Clears HWTACACS authentication statistics.
authorization: Clears HWTACACS authorization statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS statistics.
Related commands: display hwtacacs.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
reset stop-accounting-buffer (for HWTACACS)
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
User view
Default level
2: System level