R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

131
View
HWTACACS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS accounting server, in dotted decimal notation. The
default is 0.0.0.0.
port-number: Service port number of the secondary HWTACACS accounting server. It ranges from 1 to
65535 and defaults to 49.
Description
Use the secondary accounting command to specify the secondary HWTACACS accounting server.
Use the undo secondary accounting command to remove the configuration.
By default, no secondary HWTACACS accounting server is specified.
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server affects only accounting processes that occur after
the remove operation.
Related commands: display hwtacacs.
Examples
# Specify the IP address and port number of the secondary accounting server for HWTACACS scheme
hwt1 a s 10 .16 3 .15 5 .12 w i t h TC P p o r t n u m b e r 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary accounting 10.163.155.12 49
secondary authentication (HWTACACS scheme view)
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
HWTACACS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS authentication server, in dotted decimal notation.
The default is 0.0.0.0.