R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

22
Field Descri
p
tion
AllowConn Number of sessions allowed by the relationship table entry
Total find Total number of found relationship table entries
display session statistics
Syntax
display session statistics [ vd-name vd-name ]
View
Any view
Default level
2: System level
Parameters
vd-name vd-name: Displays the session statistics of the specified virtual device. The vd-name argument
specifies the name of a virtual device. It is a case-insensitive string of 1 to 20 characters, which can be
numerals, letters and underlines. Support for this keyword and argument combination depends on your
device model.
Description
Use the display session statistics command to display statistics about sessions.
With no virtual device specified, the command displays the session statistics of all virtual devices. With
no keyword specified, the command displays all session statistics information. If you specify to display
session statistics on a specified virtual device, the output information does not contain the number of
dropped packets.
Examples
# Display statistics about all sessions.
<Sysname> display session statistics
Current session(s):593951
Current TCP session(s): 0
Half-Open: 0 Half-Close: 0
Current UDP session(s): 593951
Current ICMP session(s): 0
Current RAWIP session(s): 0
Current relation table(s): 50000
Session establishment rate: 184503/s
TCP Session establishment rate: 0/s
UDP Session establishment rate: 184503/s
ICMP Session establishment rate: 0/s
RAWIP Session establishment rate: 0/s
Received TCP: 1538 packet(s) 337567 byte(s)