R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

30
Connection limit configuration commands
connection-limit apply policy
Syntax
connection-limit apply policy policy-number
undo connection-limit apply policy policy-number
View
System view
Default level
2: System level
Parameters
policy-number: Number of the existing connection limit policy, which can only be 0.
Description
Use the connection-limit apply policy command to apply a connection limit policy. The connection limit
policy to be applied must contain at least one limit rule.
Use the undo connection-limit apply policy command to remove the application.
After a connection limit policy is applied, you cannot add, remove, or modify the connection limit rules
in the connection limit policy view.
Related commands: connection-limit policy.
Examples
# Apply connection limit policy 0.
<Sysname> system-view
[Sysname] connection-limit apply policy 0
connection-limit policy
Syntax
connection-limit policy policy-number
undo connection-limit policy { policy-number | all }
View
System view
Default level
2: System level
Parameters
policy-number: Connection limit policy number, which can only be 0. A policy number uniquely identifies
a connection limit policy.