R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

Portal configuration commands

display portal acl

Syntax

display portal acl { all | dynamic | static } interface interface-type interface-number

View

Any view

Default level

1: Monitor level

Parameters

all: Displays all portal access control lists (ACLs), including dynamic ones and static ones.

dynamic: Displays dynamic portal ACLs, namely, ACLs generated after a user passes portal

authentication.

static: Displays static portal ACLs, namely, ACLs generated by related configurations.

interface interface-type interface-number: Displays the ACLs on the specified interface.

Description

Use the display portal acl command to display the ACLs on a specified interface.

Examples

# Display all ACLs on interface GigabitEthernet 0/0.

<Sysname> display portal acl all interface gigabitethernet 0/0

GigabitEthernet0/0 portal ACL rule:

Rule 0

Inbound interface : GigabitEthernet0/0

Type : static

Action : permit

Source:

IP : 0.0.0.0

Mask : 0.0.0.0

MAC : 0000-0000-0000

Interface : any

VLAN : 0

Protocol : 0

Destination:

IP : 192.168.0.111

Mask : 255.255.255.255

Rule 1

Inbound interface : GigabitEthernet0/0

Type : static

Action : redirect