R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

54
layer3: Layer 3 authentication.
redhcp: Re-DHCP authentication.
Description
Use the portal server command to enable portal authentication on an interface, and specify the portal
server to be referenced and the authentication mode.
Use the undo portal command to disable portal authentication on an interface.
By default, portal authentication is disabled on an interface.
The portal server to be referenced must exist.
For the local portal server, the re-DHCP authentication mode can be configured but will not take effect.
Related commands: display portal server.
Examples
# Enable portal authentication on interface GigabitEthernet 0/0, setting the portal server to pts, and the
authentication mode to direct.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/0
[Sysname-GigabitEthernet0/0] portal server pts method direct
reset portal connection statistics
Syntax
reset portal connection statistics { all | interface interface-type interface-number }
View
User view
Default level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number.
Description
Use the reset portal connection statistics command to clear portal connection statistics on a specified
interface or all interfaces.
Examples
# Clear portal connection statistics on interface GigabitEthernet0/0.
<Sysname> reset portal connection statistics interface gigabitethernet 0/0
reset portal server statistics
Syntax
reset portal server statistics { all | interface interface-type interface-number }