R3166-R3206-HP High-End Firewalls Access Control Command Reference-6PW101

79
self-service-url enable
Syntax
self-service-url enable url-string
undo self-service-url enable
View
ISP domain view
Default level
2: System level
Parameters
url-string: URL of the self-service server, a string of 1 to 64 characters. It must start with http:// and
contain no question mark. This URL was specified by the RADIUS server administrator during RADIUS
server installation.
Description
Use the self-service-url enable command to enable the self-service server location function and specify
the URL of the self-service server.
Use the undo self-service-url enable command to restore the default.
By default, the self-service server location function is disabled.
With the self-service function, users can manage and control their accounts and passwords. Only the
RADIUS server systems provided by the Intelligent Management Center (IMC) support the self-service
function.
Examples
# For ISP domain test, enable the self-service server location function and specify the URL of the
self-service server for changing user password to http://10.153.89.94/selfservice.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable http://10.153.89.94/selfservice
state (ISP domain view)
Syntax
state { active | block }
undo state
View
ISP domain view
Default level
2: System level
Parameters
active: Places the ISP domain in the active state to allow the users in the ISP domain to request network
services.