R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

99
Figure 72 Add an IP address group
# Add a portal device.
Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page. Then, click Add to enter the page for adding a portal device, as shown in Figure 73.
• T
ype the device name.
• Type the IP address of the firewall’s interface connected to the user.
• Type the key, which must be the same as that configured on the firewall.
• Set whether to enable IP address reallocation. Direct portal authentication is used in this example,
and therefore select No from the Reallocate IP drop-down list.
Figure 73 Add a portal device
# Associate the portal device with the IP address group.
As shown in Figure 74,
click the icon in the Port Group Information Management column of the firewall
to enter the port group configuration page.
Firewall