R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

101
[Firewall-radius-rs1] user-name-format without-domain
[Firewall-radius-rs1] quit
• Configure an authentication domain
# Create an ISP domain named dm1 and enter its view.
[Firewall] domain dm1
# Configure the ISP domain to use RADIUS scheme rs1.
[Firewall-isp-dm1] authentication portal radius-scheme rs1
[Firewall-isp-dm1] authorization portal radius-scheme rs1
[Firewall-isp-dm1] accounting portal radius-scheme rs1
[Firewall-isp-dm1] quit
# Configure dm1 as the default ISP domain for all users. Then, if a user enters the username without any
ISP domain at login, the authentication and accounting methods of the default domain are used for the
user.
[Firewall] domain default enable dm1
• Configure portal authentication
# Configure the portal server.
[Firewall] portal server newpt ip 192.168.0.111 key portal port 50100 url
http://192.168.0.111/portal
# Enable portal authentication on the interface connecting the host.
[Firewall] interface gigabitethernet 0/1
[Firewall–GigabitEthernet0/1] portal server newpt method direct
[Firewall–GigaibtEthernet0/1] quit
Verifying the configuration
Execute the following command to see whether the portal configuration has taken effect:
[Firewall] display portal interface gigabitethernet 0/1
Interface portal configuration:
GigabitEthernet0/1: Portal running
Portal server: newpt
Authentication type: Direct
Authentication domain:
Authentication network:
address : 0.0.0.0 mask : 0.0.0.0
The user can initiate portal authentication by using the HP iNode client or by accessing a web page. All
the initiated web requests are redirected to the portal authentication page http://192.168.0.111/portal.
Before passing portal authentication, the user can access only the authentication page. After passing
portal authentication, the user can access Internet resources.
After the user passes the portal authentication, you can use the following command to view the portal
user information on the firewall.
[Firewall] display portal user interface gigabitethernet 0/1
Index:19
State:ONLINE
SubState:NONE
ACL:NONE
Work-mode:stand-alone
MAC IP Vlan Interface