R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

106
Figure 78 Configure direct portal authentication with extended functions
Configuration procedure
NOTE:
• Configure IP addresses for the host, firewall, and servers as shown in Figure 78
and ensure they can
reach other.
• Configure the RADIUS server properly to provide authentication and accounting functions for users.
Configure the firewall:
1. Configure a RADIUS scheme
# Create a RADIUS scheme named rs1 and enter its view.
<Firewall> system-view
[Firewall] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the IMC server, set the server type to extended.
[Firewall-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys for
communication with the servers.
[Firewall-radius-rs1] primary authentication 192.168.0.112
[Firewall-radius-rs1] primary accounting 192.168.0.112
[Firewall-radius-rs1] key accounting radius
[Firewall-radius-rs1] key authentication radius
[Firewall-radius-rs1] user-name-format without-domain
# Configure the IP address of the security policy server.
[Firewall-radius-rs1] security-policy-server 192.168.0.113
[Firewall-radius-rs1] quit
2. Configure an authentication domain
# Create an ISP domain named dm1 and enter its view.
[Firewall] domain dm1
# Configure the ISP domain to use RADIUS scheme rs1.
[Firewall-isp-dm1] authentication portal radius-scheme rs1
[Firewall-isp-dm1] authorization portal radius-scheme rs1
[Firewall-isp-dm1] accounting portal radius-scheme rs1