R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

132
Configuring RADIUS server
From the navigation tree, select User > RADIUS > Server Configuration to enter the RADIUS server
configuration interface, as shown in Figure 89.
Figure 89 RADIUS server configuration
Table 47 RADIUS server configuration
Task Remarks
Server Type
Type of the server to be configured, including Authentication Server and
Accounting Sever
Primary Server IP
IP address of the primary server
If no primary server is specified, the text box displays 0.0.0.0.
If you enter 0.0.0.0, it means that the previously configured primary server is to
be removed.
The specified IP address of the primary server cannot be the same as that of the
secondary server. Otherwise, the system displays error messages.
Primary Server UDP Port
UDP port of the primary server
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the port number is 1812 for authentication or 1813 for
accounting.
Primary Server Status
Status of the primary server, including:
• active: The server is working normally.
• blocked: The server is down.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the status is blocked.
Secondary Server IP
IP address of the secondary server
If no secondary server is specified, the text box displays 0.0.0.0.
If you enter 0.0.0.0, it means that the previously configured primary server is to
be removed.
The specified IP address of the secondary server cannot be the same as that of the
primary server. Otherwise, the system displays error messages.