R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

158
NOTE:
The setting of the real-time accountin
g
interval somewhat depends on the performance of the NAS and the
HWTACACS server. A shorter interval requires higher performance.
Displaying and maintaining HWTACACS
To do… Use the command… Remarks
Display the configuration information
or statistics of HWTACACS schemes
display hwtacacs
[ hwtacacs-server-name [ statistics ] ]
Available in any view
Display information about buffered
stop-accounting requests for which no
responses have been received
display stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Available in any view
Clear HWTACACS statistics
reset hwtacacs statistics { accounting |
all | authentication | authorization }
Available in user view
Clear buffered stop-accounting
requests that get no responses
reset stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Available in user view
Configuring AAA methods for ISP domains
You configure AAA methods for an ISP domain by referencing configured AAA schemes in ISP domain
view. Each ISP domain has a set of default AAA methods, which are local authentication, local
authorization, and local accounting by default and can be customized. If you do not configure any AAA
methods for an ISP domain, the device uses the system default AAA methods for authentication,
authorization, and accounting of the users in the domain.
Configuration prerequisites
To use local authentication for users in an ISP domain, configure local user accounts (see “Configuring
local user attributes“) on the device.
To use remote authentication, authorization, and accounting, create the required RADIUS and
HWTACACS schemes as described in “Configuring RADIUS schemes in the web interface”,
“Configuring RADIUS schemes in the CLI”,
“Configuring HWTACACS schemes in the web interface”, or
“Configuring HWTACACS schemes in the CLI.”
Creating an ISP domain
In a networking scenario with multiple ISPs, the device may connect users of different ISPs, and users of
different ISPs may have different user attributes, such as different username and password structures,
different service types, and different rights. To distinguish the users of different ISPs, configure ISP
domains, and configure different AAA methods and domain attributes for the ISP domains.
The device can accommodate up to 16 ISP domains, including the system predefined ISP domain system.
You can specify one of the ISP domains as the default domain.
On the device, each user belongs to an ISP domain. If a user provides no ISP domain name at login, the
device considers the user belongs to the default ISP domain.
Follow these steps to create an ISP domain: