R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

168
Figure 98 Add a user for device management
2. Configure the Firewall
# Configure the IP address of interface GigabitEthernet 0/1, through which the Telnet user accesses the
Firewall.
<Firewall> system-view
[Firewall] interface GigabitEthernet 0/1
[Firewall-GigabitEthernet0/1] ip address 192.168.1.70 255.255.255.0
[Firewall-GigabitEthernet0/1] quit
# Configure the IP address of interface GigabitEthernet 0/2, through which the Firewall communicates
with the server.
[Firewall] interface GigabitEthernet 0/2
[Firewall-GigabitEthernet0/2] ip address 10.1.1.2 255.255.255.0
[Firewall-GigabitEthernet0/2] quit
# Enable the Telnet server on the Firewall.
[Firewall] telnet server enable
# Configure the Firewall to use AAA for Telnet users.
[Firewall] user-interface vty 0 4
[Firewall-ui-vty0-4] authentication-mode scheme
[Firewall-ui-vty0-4] quit
# Create RADIUS scheme rad.