R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

Figure 10 Zone classification

Configuring a zone

Configuration task list

Perform the tasks in Table 7 to configure a zone.

Table 7 Zone configuration task list

Task Remarks

Select a virtual device

Optional

To select a virtual device, select Device Management > Virtual Device >

Device Selection. For more information, see System Management and

Maintenance Configuration Guide.

By default, the current virtual device is the virtual root device.

Creating a zone

Optional

By default, the following zones are available on the virtual root device:

Management, Local, Trust, DMZ, and Untrust.

Configuring a zone member

Required

Add specified subnet address source, interfaces, Layer 2 Ethernet

interface + VLAN to the created zone, and the interfaces that can be

added and the VLANs must be on the same virtual device with the

zone.

Creating a zone

Select Device Management > Zone from the navigation tree to enter the page as shown in Figure 11. Click

Add to enter the page for creating a zone, as shown in Figure 12.