R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

24
• Defines certificate attribute-based access control policy for the device to control the access right of
the client, in order to further avoid attacks from illegal clients.
Configuring service management
Select Device Management > Service Management from the navigation tree to enter the service
management configuration page, as shown in Figure 15.
Figure 15 Service management
Table 10 shows the detailed configuration for service management.
Table 10 Service management configuration items
Item Descri
p
tion
FTP
Enable FTP
service
Specify whether to enable the FTP service.
The FTP service is disabled by default.
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service
Specify whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service
Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.