R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

45
Configuring an interzone policy rule
Select Firewall > Security Policy > Interzone Policy from the navigation tree to enter the interzone policy
rule list page, as shown in Figure 39. T
hen, click Add to enter the interzone policy rule (that is the ACL rule)
configuration page, as shown in Figure 40.
Figure 39 List of interzone policy rule list
Figure 40 Interzone policy rule configuration page
Table 22 Interzone policy rule configuration items
Item Descri
p
tion
Source Zone Specify the source zone for the interzone policy.
Dest Zone Specify the destination zone for the interzone policy.
Description Describe the ACL rule in brief.
Source IP Address
Configure a source address resource for the rule by creating an address
resource or referencing an existing address resource.
• If you select the New IP Address option, specify an IP address and
wildcard. After you apply the configuration, the system will
automatically create a subnet address resource. For example, if you
enter 1.1.1.1/0.0.0.255, a subnet address resource is created with the
resource name being 1.1.1.1/0.0.0.255.
• If you select the Source IP Address option, you can choose an existing
address resource from the drop-down list or click Multiple to select
more. The available address resources are configured in the page
brought up by selecting Resource > Address. For more information, see
the chapter "Address resource configuration."