R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

• Click Apply.

# Configure an access rule for controlling the access of all the other hosts to the external network.

• After the last configuration step, you will enter the interzone policy rule configuration page, with the

source and destination zone selected for the last rule.

• Type 1 in the Rule ID text box.

• Select Deny as the filter action.

• Select worktime as the time range.

• Select the Status check box.

• Click Apply.

Firewall policy configuration wizard

Overview

The firewall policy configuration wizard provides a way to configure firewall policies for virtual devices

easily. It can also help you to configure interzone policy parameters.

Configuring a firewall policy

Configuration prerequisites

Table 24 Firewall policy configuration prerequisites

Item Descri

tion

Security zone

Optional for root virtual devices and required for other virtual devices.

Select Device Management > Zone from the navigation tree to configure a security

zone. For more information, see the chapter “Zone configuration.”

Address resource

Optional

Select Resource > Address from the navigation tree to configure an address group

resource. For more information, see the chapter “Address resource configuration.”

Service resource

Optional

Select Resource > Service from the navigation tree to configure a service group

resource. For more information, see the chapter “Service resource configuration.”

Time range resource

Optional

Select Resource > Time Range from the navigation tree to configure a time range

resource. For more information, see the chapter “Time range resource configuration.”

Configuration Procedure

1. After logging in to the web interface, select Wizard from the navigation tree to enter the main

page of the configuration wizard.

2. Click the Firewall Policy Configuration hyperlink to enter the first page of the firewall policy

configuration wizard, as shown in Figure 47.