R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101
69
Table 37 Items of IP address based session statistics
Item Descri
p
tion
Total Connection Count
Total number of current connections
Total Connection Rate
Connection establishment rate in a 5-second sampling interval
TCP Connection Count
Total number of TCP half-open connections, TCP half-close connections, and
full TCP connections
TCP Half-Open Connection
Count
Number of TCP half-open connections
TCP Half-Close Connection
Count
Number of TCP half-close connections
TCP Connection Rate
TCP connection establishment rate in a 5-second sampling interval
UDP Connection Count
Number of full UDP connections
UDP Connection Rate
UDP connection establishment rate in a 5-second sampling interval
ICMP Connection Count
Number of full ICMP connections
ICMP Connection Rate
ICMP connection establishment rate in a 5-second sampling interval
RAWIP Connection Count
Number of current RAWIP connections
RAWIP Connection Rate
RAWIP connection establishment rate in a 5-second sampling interval
Return to Displaying session statistics.
Configuring session management in the CLI
Session management configuration task list
Complete the following tasks to configure session management:
• Setting session aging times based on protocol state
• Configuring session aging times based on application layer protocol type
• Enabling checksum verification
• Specifying the persistent session rule
• Clearing sessions manually
T
hese tasks are mutually independent and can be configured in any order. You can configure them as
required.
Setting session aging times based on protocol state
NOTE:
• This aging time setting is effective to only the sessions that are being established.
• If the application layer protocol of a session supports session aging time configuration, the session takes
the session aging time set based on the application layer protocol type as its a
g
in
g
time when it is in the
READY/ESTABLISH state. For more information about the configuration, see Confi
g
urin
g
session a
g
in
g
times based on application layer protocol type.