R3166-R3206-HP High-End Firewalls Access Control Configuration Guide-6PW101

73
To do... Use the command... Remarks
Display session relationship
table information
display session relation-table
[ vd-name vd-name ]
Available in any view
Display configuration and
statistics about logs
display userlog export Available in any view
Clear sessions
reset session [ vd-name vd-name ]
[ source-ip source-ip ] [ destination-ip
destination-ip ] [ protocol-type { icmp
| raw-ip | tcp | udp } ] [ source-port
source-port ] [ destination-port
destination-port ] [ vpn-instance
vpn-instance-name ]
Available in user view
Clear session statistics
reset session statistics [ vd-name
vd-name ]
Available in user view
Clear flow logs in the buffer reset userlog flow logbuffer Available in user view
NOTE:
For more information about the reset userlog flow logbuffer command, see
System Management and
Maintenance Command Reference.
Configuration guidelines
When you configure session management, note the following guideline:
If the number of sessions is too large, for example, more than 800,000 sessions, HP recommends you to
set large values for aging times of the protocol states and application layer protocols. Otherwise, the
responses of the console will be slow.