R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

6
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command authorization
databits
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
View
User interface view
Default level
2: System level
Parameters
5: Sets 5 data bits for each character.
6: Sets 6 data bits for each character.
7: Sets 7 data bits for each character.
8: Sets 8 data bits for each character.
Description
Use the databits command to set data bits for each character.
Use the undo databits command to restore the default.
By default, 8 data bits are set for each character.
NOTE:
• The command is only applicable to asynchronous serial interfaces (including AUX and console ports).
• The data bits settin
g
must be the same for the user interfaces of the connectin
g
ports on the device and
the terminal device for communication.
Examples
# Specify 5 data bits for each character.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 5
display ip http
Syntax
display ip http
View
Any view
Default level
1: Monitor level