R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

21
Default level
3: Manage level
Parameters
policy-name: Name of an SSL server policy, which is a string of 1 to 16 characters.
Description
Use the ip https ssl-server-policy command to associate the HTTPS service with an SSL server-end policy.
Use the undo ip https ssl-server-policy to remove the association.
By default, the HTTPS service is not associated with any SSL server-end policy.
The HTTPS service can be enabled only after this command is configured successfully.
With the HTTPS service enabled, you cannot modify the associated SSL server-end policy or remove the
association between the HTTPS service and the SSL server-end policy after the HTTPS service is enabled.
Related commands: display ip https and ssl server-policy.
Examples
# Associate the HTTPS service with SSL server-end policy myssl.
<Sysname> system-view
[Sysname] ip https ssl-server-policy myssl
lock
Syntax
lock
View
User view
Default level
3: Manage level
Parameters
None
Description
Use the lock command to lock the user interface. This method prevents unauthorized users from using the
user interface.
When entering the lock command, you are asked to input a password (up to 16 characters) and then
confirm it by inputting the password again. After locking the user interface, you must press Enter and
input the correct password next time you enter this user interface.
By default, this function is disabled.
Examples
# Lock the current user interface.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password: