R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

28
• 38400 bps
• 57600 bps
• 115200 bps
The transmission rate varies with devices and configuration environment.
Description
Use the speed command to set the transmission rate on the user interface.
Use the undo speed command to restore the default transmission rate.
By default, the transmission rate is 9600 bps.
NOTE:
• The command is only applicable to asynchronous serial interfaces (including AUX and console ports).
• The transmission rate setting must be identical for the user interfaces of the connecting ports on the
device and the target terminal device for communication.
Examples
# Set the transmission rate on the user interface AUX 0 to 19200 bps.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 19200
stopbits
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
User interface view
Default level
2: System level
Parameters
1: One stop bit.
1.5: One and a half stop bits.
2: Two stop bits.
Description
Use the stopbits command to set the number of stop bits transmitted per byte.
Use the undo stopbits command to restore the default.
By default, the stop bit is one.