R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

31
Parameters
remote-host: IP address or host name of a remote host, which is a case insensitive string of 1 to 46
characters.
-i interface-type interface-number: Specifies the outbound interface for sending Telnet packets, where
interface-type interface-number represents the interface type and number. If the destination address is a
link-local address, provide the –i interface-type interface-number argument.
port-number: TCP port number for the remote host to provide the Telnet service. It ranges from 0 to 65535
and defaults to 23.
Description
Use the telnet ipv6 command to telnet to a remote host in an IPv6 network. To terminate the current Telnet
connection, press Ctrl+K or use the quit command.
Examples
# Telnet to the remote host with the IPv6 address 5000::1.
<Sysname> telnet ipv6 5000::1
telnet server enable
Syntax
telnet server enable
undo telnet server enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use the telnet server enable command to enable the Telnet server.
Use the undo telnet server enable command to disable the Telnet server.
The Telnet server is disabled by default.
Examples
# Enable the Telnet server.
<Sysname> system-view
[Sysname] telnet server enable
terminal type
Syntax
terminal type { ansi | vt100 }
undo terminal type