R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

34
[Sysname] user-interface console 0
[Sysname-ui-console0]
# Enter the user interface views of VTYs 0 to 4.
<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4]
OAP module configuration commands
oap connect
Syntax
oap connect slot slot-number
View
User view
Default level
1: Monitor level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides.
Description
Use the oap connect command to redirect from the device to the OAP module.
To return from the operating system on the OAP module to the CLI on the device, press Ctrl+K.
Examples
# Redirect from the device to the OAP module in slot 3.
<Sysname> oap connect slot 3
Press CTRL+K to quit.
Connected to OAP!
oap management-ip
Syntax
oap management-ip ip-address slot slot-number
undo oap management-ip slot slot-number
View
System view
Default level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides.